Victoria Vintage Floral Wall Mural
Enter your exact wall size. We add 10cm to the width and height for trimming.
We'll show you how this wallpaper will look in your space. Send us a photo and your wall measurements: hello@tinywalls.com.au
30-day money-back guarantee
- Woven polyester fabric with a soft matte finish, not vinyl
- Self-adhesive backing. Peel and stick, no glue or paste
- Made from non-toxic materials
- Fire-rated for safety
- Wipeable surface for everyday life
About this design
Large, densely packed peonies in dusty pink, mauve and cream, set against deep olive foliage. The blooms are drawn close to life size, so a single wall carries only a handful of them.
This is the boldest floral in the range. The scale and the depth of colour make it a statement wall rather than a backdrop — it suits a room that can carry a strong focal point.
You love the look. You just don't want to commit.
That's exactly why this exists.
Our peel and stick wallpaper gives you the full visual impact of designer wallpaper — rich colour, beautiful detail, a room that stops people mid-step — with one crucial difference. When you're ready for something new, it comes off cleanly. No steaming. No scraping. No regrets.
This isn't a temporary fix. It's a permanent upgrade with an exit strategy.
Why fabric changes everything
Most peel and stick wallpaper is vinyl. Shiny, plastic-feeling, unforgiving if you make a mistake during installation. Ours is different.
We print on premium matte polyester fabric — the same soft, flat finish you'd expect from a high-end interior. No gloss. No sheen. No "I stuck this on my wall" look. In a room, it reads like a mural. Up close, you can see the depth and detail in the artwork. It doesn't look applied. It looks like it was always there.
Fabric also means you have room to breathe during installation. If a panel isn't sitting right, lift it, reposition it, and smooth again. Vinyl tears. Fabric forgives.
What arrives in your order
Every order is custom-made for your wall dimensions and arrives ready to install — no measuring, no cutting, no guesswork:
- Pre-cut panels sized to your exact wall width and height
- Panels numbered in sequence — start at 1, work across
- 2cm overlap built into every panel for seamless pattern matching
- Pattern aligns automatically as you move across the wall
- Installation guide included
Panel width: approximately 62cm · Overlap: 2cm per join
What your wall needs to be
Our non-permanent, pressure-activated adhesive removes cleanly — but only on walls that are properly prepared. For the best result and clean removal, your wall needs to be:
- Smooth interior surface — drywall or plaster
- Sanded, primed, and painted with two coats of quality acrylic paint
- Fully cured — at least 30 days since painting
- Clean and dry at time of installation
Not suitable for: textured walls, raw plaster, brick, bathrooms, high-humidity areas, or surfaces with chalky, powdery, or flaking paint.
Not sure about your wall? Use the free test sample included with every order. Apply it, wait 24–48 hours, and peel it off. If it removes cleanly, your panels will too. We always recommend testing first — especially in rental properties.
Installing it
Most people complete a standard feature wall in 2–3 hours. Here's what you'll need:
- A soft squeegee or credit card wrapped in a cloth
- A microfibre cloth for wiping the wall
- A spirit level for your first panel
- A sharp utility knife for trimming edges
- A second person for panels taller than 2m (recommended)
Start with a clean, dry wall. Use a spirit level to draw a faint vertical guide line — this keeps panel 1 straight and everything that follows it. Peel the backing gradually from the top, position, and smooth downward. Never peel the full backing at once on tall panels. Work panel by panel, matching the 2cm overlap, until your wall is done.
For the full step-by-step guide with photos, visit our Installation Guide.
Removing it
When you're ready for a change — whether that's in six months or six years — warm each panel with a hairdryer on low heat for 30–60 seconds, then peel slowly downward at a 45-degree angle, keeping the panel flat against the wall. Go slowly. Reapply heat if you feel resistance. On properly prepared walls, removal is clean — no residue, no marks.
Renters: Photograph your wall before installation and again after removal. This protects you during your final inspection.
For the full removal guide, visit our Removal Guide.
What this wallpaper is made for
- Feature walls in bedrooms, nurseries, living rooms, and hallways
- Rental properties — removable on suitable walls with the test sample confirmed
- Anyone who wants a high-end interior result without a renovation
- Spaces that deserve something beautiful, without the long-term commitment
Not recommended for bathrooms, laundries, or any high-humidity or moisture-prone areas.
Made in Melbourne
Every design starts as original artwork — illustrated, refined, and printed in our family-run studio in Victoria. Not a factory. Not a print-on-demand service. We make every order ourselves, check it before it leaves, and ship it to your door within 48 hours.
This is what Melbourne-made looks like.
The honest version
We believe in telling you exactly what this product can and can't do — because a customer who knows what to expect becomes a customer who's genuinely delighted when it works.
This wallpaper is not suitable for every wall. It will not perform on textured, raw, or poorly painted surfaces. But on a properly prepared smooth interior wall — which is most Australian homes — it is one of the most beautiful, most stress-free ways to transform a room that exists.
Use the free test sample. Prep your wall properly. Follow the installation guide. And enjoy what your walls can become.
Proudly designed and printed in Victoria, Australia. Free test sample included with every order. 30-Day Happiness Guarantee.
Up in about 2 hours
1. Measure
Enter your wall size. We add 10cm of trim.
2. Peel
Panels come pre-cut and numbered.
3. Stick
Smooth it on and trim the ends.
In real rooms
Questions
How much do I need?
Enter your wall size above and we work it out. Odd-shaped wall? Send us a photo.
Will I see the joins?
Each panel overlaps the next by 2cm so the pattern lines up. Up close you can find the join.
Will it work on my wall?
It needs smooth, primed paint that's fully cured. Not for textured walls or raw plaster. If you're not sure, try a sample first.
How does it come off?
Warm the adhesive, then peel slowly and flat against the wall. Removal guide
How long does it take?
About 2 hours for a flat wall with no windows. Installation guide
Dashed lines show where the 60cm panels join. Shown to scale.
- Width: measure across the wall at the top, middle and bottom. Use the biggest number.
- Height: measure from where the wallpaper starts to where it stops (usually skirting board to ceiling) on the left, middle and right. Use the biggest number.
- Don't take off windows or doors. Measure the whole wall.
- Type in your exact numbers. We add the 10cm for trimming, so don't add it yourself.
Sloping ceiling or an awkward wall? Send us a photo and we'll work it out.
Walls, floors and ceilings are rarely perfectly straight. The extra 10cm on the width and height means the panels always reach every edge, and you trim the spare off once it's up.
Then we round up to whole panels. Each panel covers 60cm of wall (it's 62cm wide, with a 2cm overlap at each join).
Example: a 300 × 240cm wall becomes 310 × 250cm, so you get 6 panels with a 270cm drop.
- 25,000+ Australian families
- 800+ customer reviews
- Made in Melbourne designed and printed since 2019
- 30 days money-back guarantee
Real rooms, real walls
Tag @tinywalls to be featured
Loved in real Australian nurseries
Every review is from a verified Tiny Walls customer.
No reviews yet
Be the first to review this design — we'd love to see it on your wall.
Thank you!
Your review has been submitted and will appear here once it's processed.

