Sage Two-Tone Half Wall Panels
Product Description + Sizing Info
Give a nursery, playroom or dining room a designer panelling look without paint or tools, in two sage tones with a scalloped edge. Matte fabric finish that looks hand-painted, removable and repositionable, sold per panel.
Sizing
- Each panel: 50cm wide × 120cm high
- Finish: matte fabric with a hand-painted appearance
- Colour: Sage two-tone scalloped design
How many do I need?
- Each panel is 50cm wide × 120cm high and panels line up for a continuous scalloped effect
- Measure your wall width in cm, divide by 50cm and round up
- Example: 265cm wall = 6 panels
- Example: 300cm wall = 6 panels
- Example: 400cm wall = 8 panels
- Order all panels in one go to ensure colour consistency, as slight variations can occur between print batches
How to Install
Test Sample (included free in every order)
- Choose a spot: Wipe clean with a damp microfiber cloth and let dry.
- Apply the sample: Peel, stick, and smooth down by hand.
- Wait 24–48 hrs: Check adhesion and paint hold.
- Remove with gentle heat: Warm with a hairdryer and peel slowly downwards, flat against the wall.
If the sample works, your decals will too. Fresh paint (30+ days), textured/porous walls, or poor prep may affect results.
Quick Install Guide
- Start with clean, dry, smooth walls and fully cured paint (30+ days after painting).
- Peel the decal from the backing.
- Position and smooth firmly with your hands or a soft squeegee.
- For larger pieces, cut and apply individually for easier alignment.
Most installs take just minutes.
Removal
- Warm with a hairdryer and peel slowly downwards, flat against the wall (not outwards).
Removal Guide
Warm a hairdryer on low heat over the decal for 30–60 seconds, then peel slowly from a corner in a downwards direction, keeping the decal as close to the wall as possible, Don't pull outwards from the wall. Heat again if needed.
Materials & Wall Types
Our decals are printed on premium, non-toxic polyester fabric with a soft matte finish — never vinyl. They use a removable, water-based adhesive so you can reposition during install and peel away when you’re ready for a change.
Best on: Smooth, fully cured painted walls finished with quality primer and acrylic paint.
Not suitable for: Textured walls, raw plaster, brick, bathrooms, or high-humidity areas.
Tip: For freshly painted walls, wait at least 30 days before applying. Avoid chalky, powdery, or flaking surfaces.
Great wallpaper for our nursery. Easy to install and looks the same as on the website photos. Unfortunately, our walls are made of plaster instead of gyprock, so some bubbles formed overnight after installation.
