Wide Stripe Kelp Wallpaper
Enter your exact wall size. We add 10cm to the width and height for trimming.
We'll show you how this wallpaper will look in your space. Send us a photo and your wall measurements: hello@tinywalls.com.au
30-day money-back guarantee
- Woven polyester fabric with a soft matte finish, not vinyl
- Self-adhesive backing. Peel and stick, no glue or paste
- Made from non-toxic materials
- Fire-rated for safety
- Wipeable surface for everyday life
About this design
A wide vertical stripe in deep kelp teal and warm cream, evenly spaced with a clean edge. The width is generous enough to add height to a room without turning into a graphic statement.
Somewhere between a dark green and a dark blue, with grey pulling it back from either. It's moody without being heavy — the cream stripe carries enough light that a room stays bright, while the teal gives it depth. Works beautifully with brass and pale timber.
Where it works
A feature wall in a bedroom, a study, a hallway, or a boys' room with a coastal or nautical lean.
The details
- Peel and stick — no glue, no paste, no tradesperson
- Soft matte fabric finish, not glossy vinyl
- Repositionable while you hang it, so panels nudge into alignment
- Wipeable surface for everyday life
How it arrives
Pre-cut, numbered panels approximately 62cm wide, with a 2cm overlap for pattern matching. Designed in Melbourne.
Removal
Made to come away from well-primed, fully cured paint using the heat-release method — warm the adhesive, then peel slowly downward and flat against the wall. Wall preparation matters more than the wallpaper does, so test first and follow the removal guide.
Up in about 2 hours
1. Measure
Enter your wall size. We add 10cm of trim.
2. Peel
Panels come pre-cut and numbered.
3. Stick
Smooth it on and trim the ends.
Questions
How much do I need?
Enter your wall size above and we work it out. Odd-shaped wall? Send us a photo.
Will I see the joins?
Each panel overlaps the next by 2cm so the pattern lines up. Up close you can find the join.
Will it work on my wall?
It needs smooth, primed paint that's fully cured. Not for textured walls or raw plaster. If you're not sure, try a sample first.
How does it come off?
Warm the adhesive, then peel slowly and flat against the wall. Removal guide
How long does it take?
About 2 hours for a flat wall with no windows. Installation guide
Dashed lines show where the 60cm panels join. Shown to scale.
- Width: measure across the wall at the top, middle and bottom. Use the biggest number.
- Height: measure from where the wallpaper starts to where it stops (usually skirting board to ceiling) on the left, middle and right. Use the biggest number.
- Don't take off windows or doors. Measure the whole wall.
- Type in your exact numbers. We add the 10cm for trimming, so don't add it yourself.
Sloping ceiling or an awkward wall? Send us a photo and we'll work it out.
Walls, floors and ceilings are rarely perfectly straight. The extra 10cm on the width and height means the panels always reach every edge, and you trim the spare off once it's up.
Then we round up to whole panels. Each panel covers 60cm of wall (it's 62cm wide, with a 2cm overlap at each join).
Example: a 300 × 240cm wall becomes 310 × 250cm, so you get 6 panels with a 270cm drop.
- 25,000+ Australian families
- 800+ customer reviews
- Made in Melbourne designed and printed since 2019
- 30 days money-back guarantee
Real rooms, real walls
Tag @tinywalls to be featured
Loved in real Australian nurseries
Every review is from a verified Tiny Walls customer.
No reviews yet
Be the first to review this design — we'd love to see it on your wall.
Thank you!
Your review has been submitted and will appear here once it's processed.
