Wave Half Wall Panels - Choose a Colour
How Many Panels Do You Need?
Enter your wall width below — we'll calculate the exact number of panels so you order right the first time.
Common wall sizes
Product Description + Sizing Info
HOW MANY PANELS DO I NEED?
Quick Calculator:
Each panel covers 50cm wide × 120cm high (0.6m²)
Simply measure your wall width and divide by 50cm:
-
2m wide wall = 4 panels ($196)
-
2.5m wide wall = 5 panels ($245)
-
3m wide wall = 6 panels ($294)
-
3.5m wide wall = 7 panels ($343)
-
4m wide wall = 8 panels ($392)
💡 Pro tip: Measure your wall width in centimeters, then divide by 50 to get the exact number of panels needed.
POPULAR WALL SIZES
|
Room Type |
Typical Wall Width |
Panels Needed |
Total Cost |
|---|---|---|---|
|
Cot feature wall |
1.5m - 2m |
3-4 panels |
$147 - $196 |
|
Single bed wall |
2m - 2.5m |
4-5 panels |
$196 - $245 |
|
Double bed wall |
3m - 3.5m |
6-7 panels |
$294 - $343 |
|
Full playroom wall |
4m+ |
8+ panels |
$392+ |
✅ Order all panels at once to ensure colour consistency (block colours are printed in batches).
WHAT YOU GET:
-
Price shown is per single panel (50cm × 120cm)
-
Select your colour from the dropdown
-
Add the quantity you need to cart
Create a playful scalloped wall in minutes with our peel-and-stick decal panels. Each 50cm x 1.2m panel is sold individually so you can build your perfect feature wall in any colour you love. These panels are designed to sit side-by-side without overlap to create a seamless scalloped effect.
Note: Block colours are printed in batches. We recommend ordering all panels at once to ensure colour consistency.
How to Install
Test Sample (included free in every order)
- Choose a spot: Wipe clean with a damp microfiber cloth and let dry.
- Apply the sample: Peel, stick, and smooth down by hand.
- Wait 24–48 hrs: Check adhesion and paint hold.
- Remove with gentle heat: Warm with a hairdryer and peel slowly downwards, flat against the wall.
If the sample works, your decals will too. Fresh paint (30+ days), textured/porous walls, or poor prep may affect results.
Quick Install Guide
- Start with clean, dry, smooth walls and fully cured paint (30+ days after painting).
- Peel the decal from the backing.
- Position and smooth firmly with your hands or a soft squeegee.
- For larger pieces, cut and apply individually for easier alignment.
Most installs take just minutes.
Removal
- Warm with a hairdryer and peel slowly downwards, flat against the wall (not outwards).
Removal Guide
Warm a hairdryer on low heat over the decal for 30–60 seconds, then peel slowly from a corner in a downwards direction, keeping the decal as close to the wall as possible, Don't pull outwards from the wall. Heat again if needed.
Materials & Wall Types
Our decals are printed on premium, non-toxic polyester fabric with a soft matte finish — never vinyl. They use a removable, water-based adhesive so you can reposition during install and peel away when you’re ready for a change.
Best on: Smooth, fully cured painted walls finished with quality primer and acrylic paint.
Not suitable for: Textured walls, raw plaster, brick, bathrooms, or high-humidity areas.
Tip: For freshly painted walls, wait at least 30 days before applying. Avoid chalky, powdery, or flaking surfaces.