Sage Two-Tone Scalloped Half Wall Panels
Product Description + Sizing Info
Dreaming of designer wall panelling but dreading the mess, cost, and commitment?
You're not alone. Custom wall panelling typically costs thousands, takes days to install, and requires professional painters. And if you're renting? Forget about it. Plus, there's always that nagging fear: what if I mess it up and ruin my walls?
Here's the solution: Our Sage Two-Tone Scalloped Half Wall Panels give you that high-end designer look in minutes—with zero painting, zero tools, and zero stress. Made from premium removable fabric, they apply smoothly, reposition perfectly, and remove cleanly whenever you're ready for a change.
Why this works so well:
✓ Removable fabric = mistake-proof - Peel and reposition until it's perfect. No pressure, no permanent mistakes.
✓ Seamless alignment - Panels line up perfectly for a continuous scalloped effect. Looks professionally installed.
✓ Hand-painted appearance - Matte fabric finish that looks like real custom panelling, not a decal.
✓ Renter-friendly - Non-permanent adhesive that removes cleanly with gentle heat.
✓ Done in minutes - What would take a painter days, you'll finish before lunch.
✓ Fraction of the cost - Get the designer look without the designer price tag.
Panel Specifications:
- Size: 50cm wide × 120cm high (per panel)
- Finish: Matte fabric with hand-painted appearance
- Colour: Sage two-tone scalloped design
How many panels do you need?
- Measure your wall width in cm
- Divide by 50cm
- Round up = number of panels to order
Quick reference:
- 265cm wall = 6 panels
- 300cm wall = 6 panels
- 400cm wall = 8 panels
Important: Order all your panels in one go to ensure colour consistency (slight variations can occur between print batches).
Ready to transform your space? Join hundreds of customers who've ditched the painter and created their dream walls in minutes. Perfect for nurseries, playrooms, bedrooms, dining rooms, and entryways.
How to Install
Test Sample (included free in every order)
- Choose a spot: Wipe clean with a damp microfiber cloth and let dry.
- Apply the sample: Peel, stick, and smooth down by hand.
- Wait 24–48 hrs: Check adhesion and paint hold.
- Remove with gentle heat: Warm with a hairdryer and peel slowly downwards, flat against the wall.
If the sample works, your decals will too. Fresh paint (30+ days), textured/porous walls, or poor prep may affect results.
Quick Install Guide
- Start with clean, dry, smooth walls and fully cured paint (30+ days after painting).
- Peel the decal from the backing.
- Position and smooth firmly with your hands or a soft squeegee.
- For larger pieces, cut and apply individually for easier alignment.
Most installs take just minutes.
Removal
- Warm with a hairdryer and peel slowly downwards, flat against the wall (not outwards).
Removal Guide
Warm a hairdryer on low heat over the decal for 30–60 seconds, then peel slowly from a corner in a downwards direction, keeping the decal as close to the wall as possible, Don't pull outwards from the wall. Heat again if needed.
Materials & Wall Types
Our decals are printed on premium, non-toxic polyester fabric with a soft matte finish — never vinyl. They use a removable, water-based adhesive so you can reposition during install and peel away when you’re ready for a change.
Best on: Smooth, fully cured painted walls finished with quality primer and acrylic paint.
Not suitable for: Textured walls, raw plaster, brick, bathrooms, or high-humidity areas.
Tip: For freshly painted walls, wait at least 30 days before applying. Avoid chalky, powdery, or flaking surfaces.
