Construction Site Dirt Piles & Safety Cones
60k+ decals created for 25,000+ happy customers since 2019
orders over $120
Approved
Bring your child's construction dreams to life with our Dirt Piles and Safety Cones Wall Decals! These fun accents complete the perfect construction zone, turning any space into a place for imagination and play. Mix and match them with our standalone construction trucks to create a dynamic, ever-changing world where your little builder can explore, create, and dream big.
Small Set (to suit Large Trucks):
6 Γ Safety Cones (12 cm W Γ 14 cm H)
3 Γ Dirt Piles (42β71 cm W Γ 20β33 cm H)
Medium Set (to suit Mega Trucks):
7 Γ Safety Cones (16 cm W Γ 19 cm H)
1 Γ Dirt Pile (76 cm W Γ 35 cm H)
1 Γ Dirt Pile (95 cm W Γ 44 cm H)
How to Install
Test Sample (included free in every order)
- Choose a spot: Wipe clean with a damp microfiber cloth and let dry.
- Apply the sample: Peel, stick, and smooth down by hand.
- Wait 24β48 hrs: Check adhesion and paint hold.
- Remove with gentle heat: Warm with a hairdryer and peel slowly downwards, flat against the wall.
If the sample works, your decals will too. Fresh paint (30+ days), textured/porous walls, or poor prep may affect results.
Quick Install Guide
- Start with clean, dry, smooth walls and fully cured paint (30+ days after painting).
- Peel the decal from the backing.
- Position and smooth firmly with your hands or a soft squeegee.
- For larger pieces, cut and apply individually for easier alignment.
Most installs take just minutes.
Removal
- Warm with a hairdryer and peel slowly downwards, flat against the wall (not outwards).
Removal Guide
Warm a hairdryer on low heat over the decal for 30β60 seconds, then peel slowly from a corner in a downwards direction, keeping the decal as close to the wall as possible, Don't pull outwards from the wall. Heat again if needed.
Materials & Wall Types
Our decals are printed on premium, non-toxic polyester fabric with a soft matte finish β never vinyl. They use a removable, water-based adhesive so you can reposition during install and peel away when youβre ready for a change.
Best on: Smooth, fully cured painted walls finished with quality primer and acrylic paint.
Not suitable for: Textured walls, raw plaster, brick, bathrooms, or high-humidity areas.
Tip: For freshly painted walls, wait at least 30 days before applying. Avoid chalky, powdery, or flaking surfaces.