Australian Animal Decal Value Pack
Transform their walls into a world of adventure with hand-painted Australian animals that spark stories and imagination.
60k+ decals created for 25,000+ happy customers since 2019
orders over $150
Approved
Product Description + Sizing Info
Bring the calm and beauty of the Australian bush into your child’s room with our exclusive hand-painted Australiana Animal decals.
Featuring six much-loved native animals, this collection creates a nurturing environment that inspires curiosity, storytelling, and a connection to nature.
Each decal is carefully reproduced on premium fabric so it looks like real artwork on the wall, adding warmth and character to nurseries, playrooms, and bedrooms.
Pack Information:
- SMALL Set:
• Kangaroo – 55cm × 58cm
• Wombat – 38cm × 24cm
• Koala – 31cm × 35cm
• Echidna – 31cm × 20cm
• Kookaburra – 15cm × 28cm
• Galah – 16cm × 21cm
- MEDIUM Set:
• Kangaroo – 80cm × 86cm (supplied in 2 pieces with 1cm overlap for easy install)
• Wombat – 56cm × 35cm
• Koala – 43cm × 49cm
• Echidna – 44cm × 29cm
• Kookaburra – 20cm × 41cm
• Galah – 23cm × 44cm
How to Install
Test Sample (included free in every order)
- Choose a spot: Wipe clean with a damp microfiber cloth and let dry.
- Apply the sample: Peel, stick, and smooth down by hand.
- Wait 24–48 hrs: Check adhesion and paint hold.
- Remove with gentle heat: Warm with a hairdryer and peel slowly downwards, flat against the wall.
If the sample works, your decals will too. Fresh paint (30+ days), textured/porous walls, or poor prep may affect results.
Quick Install Guide
- Start with clean, dry, smooth walls and fully cured paint (30+ days after painting).
- Peel the decal from the backing.
- Position and smooth firmly with your hands or a soft squeegee.
- For larger pieces, cut and apply individually for easier alignment.
Most installs take just minutes.
Removal
- Warm with a hairdryer and peel slowly downwards, flat against the wall (not outwards).
Removal Guide
Warm a hairdryer on low heat over the decal for 30–60 seconds, then peel slowly from a corner in a downwards direction, keeping the decal as close to the wall as possible, Don't pull outwards from the wall. Heat again if needed.
Materials & Wall Types
Our decals are printed on premium, non-toxic polyester fabric with a soft matte finish — never vinyl. They use a removable, water-based adhesive so you can reposition during install and peel away when you’re ready for a change.
Best on: Smooth, fully cured painted walls finished with quality primer and acrylic paint.
Not suitable for: Textured walls, raw plaster, brick, bathrooms, or high-humidity areas.
Tip: For freshly painted walls, wait at least 30 days before applying. Avoid chalky, powdery, or flaking surfaces.
